Lynx Hardware
Lynx Hardware started off with a few pressed metal fittings, mostly post caps and pipe clamps for chain link fencing, being bashed out in a small New Zealand shed. Now it's so much more.
Split Cross
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $9.17
Chain Link Mesh
TWIST TOP mesh now available on request (POA). Lynx chainlink mesh is manufactured in New Zealand using a Bergandi chain link mesh weaver from the USA. It produces tight knuckles which ensure a deformation resistant mesh. Our Galv mesh is...
from $9.58
Square Steel Post Cap
Square Steel Post Caps are to be knocked (with a wooden or rubber mallet) onto the outer surface of square steel tubing.
from $4.77
Razor Wire Concertina
Lynx Long Barb Concertina Razor Wire is the ultimate high security fence top deterrent. Made from high tensile steel tape with wire running up the center it is extremely sharp and hard to cut. The only made in NZ razor...
from $261.00
Razor Wire Coil
Lynx Long Barb Coil Razor Wire is the ultimate high security fence top deterrent. Made from high tensile steel tape with wire running up the center it is extremely sharp and hard to cut. The only made in NZ razor...
from $218.00
Aluminium Flag Drop Bolt
Pad-Lockable, Aluminium Flag Drop Bolt. Supplied with two lugs and two tubes that are welded to the gate prior to powder coating.
$94.00
Rising Pipe Hinge
Rising Hinges for Pipe & Mesh gates slide inside the gate frame allowing it to rise as it opens. This requires a wheel at on the end of the gate and works best on a concreted driveway. Used in conjunction...
$126.00
Lock Box
The Lock Box houses and protects a pad lock to lock a manual boom gate or pipe & mesh gate. It comprises of a hot dip galvanised Pipe with a slot to receive a locking tab. A padlock is locked...
$124.00
Park End Catch Bracket
Park Bracket is a convenient offset bracket for mounting catches and end cups. It can be mounted horizontally to a 100shs post or vertically directly to the concrete pad. Suits: Cais Medium Cantilever End Cup, TonkaTrak End Cup, Paddock 4...
from $93.60
Gate Safety Cable
Gate Safety Cables stops a swing gate from falling to the ground in the event that the hinges are damaged. It is recommended to install these on all swing gates above 1.8m high in public places in order to prevent...
from $60.30
Sliding Gate Track
Sliding Gate Track is bolted to the ground. U shaped, grooved wheels are attached to the underside of a gate enabling it to slide over the track. Available in 6m and 3m lengths. If delivery is required then, 6m lengths...
from $59.30
TruGlide Sliding Gate Guide Block
TruGlide is a super convenient way to guide your aluminium sliding gate - especially on sloping driveways. The guide block runs in a black anodised aluminium channel that is attached to a guide post on the inside of your gate....
$56.20
Sliding Gate Box Guide Roller
Box Guide Rollers are a premium guide roller option for industrial sliding gates. They have a hot dip galv bracket and use stainless steel bearing rollers. The ultimate industrial sliding gate guide. The bracket attaches to the side posts on...
from $98.80
Round Post Guide Roller
The Round Post Guide Roller is designed for 80nb posts and perfect for guiding Pipe & Mesh gates.
$77.00
Heavy Duty Bearing Roller
These Heavy Duty Guide Rollers feature a machined M16 Stainless Steel shaft with two stainless steel concealed roller bearings. The ultimate guide roller for industrial applications.
$60.30
Angle Guide Roller
Angle Guide Rollers are the best way to guide a gate from one side. The two rollers run against an equal angle section that is part of the gate frame. The rollers are horizontally adjustable so that one will run...
from $124.00
Heavy Duty Roller Assembly with O-Rings
The Heavy Duty Roller Assembly with O-Rings is suitable for gates of up to 100mm wide frames and is used in conjunction with Lynx Stainless Steel Bearing O-Ring Rollers.
from $31.40
Two Roller Sliding Gate Guide
Nylon sliding gate guide roller and bracket. The easiest way to guide a sliding gate.
$30.10
Double Swing Gate Catch
The Double Swing Gate Catch is an easy way to latch two gates that meet together in the middle. Made from aluminium and using stainless steel fasteners, this latch will never rust and look good for years. A simple elegant...
$60.30
Rebate Gate Wheel
High Clearance rebate gate wheels are ideal for residential and commercial gates where a low under gate gap is required yet but you don't want the gate to scrape on the track. These wheels can cope with up to 50mm...
from $49.90
Anti-Theft Bracket
An Anti-Theft Bracket is attached to the gate post and used in conjunction with a Sliding Gate Catch. It provides a way of attaching the Catch and also stops the gate from being lifted off the track.
$36.70
Spike Razor Top
Spike razor top is an easy way to increase the security level of your fence or gate. It comes in 800mm lengths and is concave on the underside to allow it to also be attached to a pipe too. The...
$34.40
RP22 Hog Rings
RP22 Hog Rings are a quick and effective way to attach chain link mesh or razor wire to line wires or barbed wires on a fence. Made from Steel and coated with Zinc Aluminium these stand up to the New...
$22.60
Thru Post Wire Ties
Thru Post Wire Ties are used to secure Line Wires and Barbed wire to posts.
from $20.10